Desk-Type Output 12.6V5a Lithium Battery Charger Power Adapter

Lithium Battery Charger (AC/DC)
1.Product Description:  
Input: AC 100V-240V 50/60HZ 1.5A(Max)
Output: DC 12.6 5A
PS: Red light means charing
    Blue light means charge full or disconnect
Note: Please charge in a dry please
Warning:Please do not open due to the high voltage
>Protections: Short circuit / Over load / Over voltage
>Fully enclosed plastic case
ELECTRICAL CHARACTERISTICS
>Efficiency: >= 85%
>Turn-On Delay Time:300mS
>Load Regulation: 5% max.
>Hold-up Time: 5mS min.
>Dielectric Strength:(Hi-Pot):Between AC input and secondary applied AC 3.0kV,test time 1 minute, and cut off current shall be less than 10 mA.AC 3.0kV,test time 10 Sec.for mass production.
>Insulation Resistance: Between AC input and secondary applied 500Vdc,test time 1 minute. 500Vdc,test time 10 Sec.for mass production. ≥100MΩ
ENVIRONMENTAL
>Operating Temperature: 0 to 50oC
>Storage Temperature: -40 to 85oC
>Relative Humidity: 5 to 95%
2.PRODUCT APPLICATION :
Our battery charger,power adapter are widely used in battery pack E-bike, Electric Golf Cart, Electric Vehicle, Electric Toys, Power tools, Motor, Massage, Equipment, Monitoring System, Beauty instruments, medical instruments, Safety Security Products, Humidifier, Water-pump, Wheel Chair, Self-balance Scoober, Air Cleaner, Print Device, Precise Digital Measuring Apparatus, Audio Amplifier, LED Lighting, Digital Communication Products, LCD, LED Display ,etc

3.Factory Profiles

 

5.Contact
SHENZHEN SANYI TECHNOLOGY CO.,LTD 
Web: sanyipower.en.made-in-china.com
 
 
Phone\:+86 15207552952
Tel: +86 755 28986673
Add: Floor 4, Block 1,HongJiaTai Industrial Area, XinTun Village,AiLian Community,  LongGang District,Shenzhen 518172,China